Table of Contents
Advertisement
Block (Multi-sector Transfer) M [Auto]
Enables or disables data multi-sectors transfers. When set to [Auto], the data
transfer from and to the device occurs multiple sectors at a time if the device
supports multi-sector transfer feature. When set to [Disabled], the data transfer
from and to the device occurs one sector at a time.
Configuration options: [Disabled] [Auto]
PIO Mode [Auto]
Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode.
Configuration options: [Auto] [SWDMAO] [SWDMA1] [SWDMA2] [MWDMA0]
[MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]
[UDMA6]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
5.3.6
SATA Configuration
The Storage Configuration menu allows you to configure your storage device(s).
Select an item then press <Enter> to display the sub-menu.
Main
SATA Configuration
OnChip SATA channel
OnChip SATA Type
OnChip SATA Channel [Enabled]
Enables or disables OnChip SATA Channel.
Configuration options: [Disabled] [Enabled]
5-16
BIOS SETUP UTILITY
[Enabled]
[SATA]
Options
Disabled
Enabled
Chapter 5: BIOS setup
Advertisement
Table of Contents
