Table of Contents
Advertisement
5.4.6
USB Configuration
The items in this menu allows you to change the USB-related features. Select an
item then press <Enter> to display the configuration options.
Advanced
USB Configuration
Module Version - 2.24.3-13.4
USB Devices Enabled:
USB Function
USB 2.0 Controllers
Legacy USB Support
USB 2.0 Controller Mode
The Module Version and USB Devices Enabled items show the
auto-detected values. If no USB device is detected, the item shows None.
USB Function [Enabled]
Enables or disables USB Controllers. Configuration options: [Disabled] [Enabled]
USB 2.0 Controllers [Enabled]
Enables or disables USB 2.0 controllers. Configuration options: [Disabled]
[Enabled]
Legacy USB Support [Auto]
Allows you to enable or disable support for Legacy USB storage devices, including
USB flash drives and USB hard drives. Setting to Auto allows the system to
detect the presence of USB devices at startup. If detected, the USB controller
legacy mode is enabled. If no USB device is detected, the legacy USB support is
disabled. Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller Mode [HiSpeed]
Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full
Speed (12 Mbps). Configuration options: [FullSpeed] [HiSpeed]
5-28
None
[Enabled]
[Enabled]
[Auto]
[HiSpeed]
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Enanbles USB host
controllers.
Select Screen
Select Item
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
Chapter 5: BIOS setup
Advertisement
Table of Contents
Need help?
Do you have a question about the V4-M3A3200 and is the answer not in the manual?