Congratulations on your organization's decision to install a NEC SV9100
telecommunications system provided by Atel Communications. The goal of this
guide is to have you effectively using your new system in as little time as
possible. This guide is not designed to teach the more complex system features
and applications. It is to teach the basics of call processing so that you can
quickly return to doing your job with increased efficiency. You will learn:
1. How to make both outgoing and intercom calls.
2. How to receive incoming and transfer calls.
3. How to use Hold and Park.
4. How to set up your voice mailbox and use your voice mail system.
Additional user information can be found in the Telephone and Voice Mail User
Guide, which is more in-depth. For specific questions not addressed during the
on-site training, the Quick-Start and more in-depth Telephone and Voice Mail
User Guide, please call Atel's help-desk at 858-646-4646.
Enjoy your new Atel / NEC telephone system and thank you for helping make this
a positive experience for your organization.
Press this key to send a hook flash to the CO you are currently on. Depending on
the CO, it may put the caller on hold with Telco or hang up.
Used to activate terminal setup functions and to program One-Touch keys.
Feature + 1 – Turns microphone On/Off
Press this key to put a call on hold.
Allows the extension user to transfer a call or make a second call.
Controls built-in speaker, which can be used for Hands Free Dialing/Monitoring.
LED on key lights when key is active.
Explanations of Programmable Keys can be called up on the LCD by pressing
and holding the Help key plus a programmable key.
The user can exit from the Menu or Help mode by pressing this key.