Table of Contents
Advertisement
Possible are: 1144, 1244, 1344, 1444, 2144, 2244, 2344, 2444, 3144, 3244,
3344, 3444, 4144, 4244, 4344
Global master (4444)
If you set the address group and subaddress of a channel to 44, then this channel functions
as a global master. All receivers that are programmed with this global master address are
controlled simultaneously.
The only global master is 4444.
3. Addressing for a double number of channels
To change the address group and subaddress for a single button proceed as follows:
- Press and hold the button to be programmed.
Now also press the left/right button next to it. Keep both buttons pressed simultaneously
for at least five seconds!
The control indicator/LED blinks every second, indicating that the programming mode
has now been activated.
- Now enter a two-digit address group and a two-digit subaddress using the '
3
4
'
' and '
Example: 1112 (11 = address group, 12 = subaddress)
- The programming mode ends automatically once you have entered the fourth digit. The
control indicator/LED goes out.
c) Resetting to the delivery state
In order to reset all the transmitter's settings to the delivery state you need to first simultane-
ously press and hold the '
lights up.
Now release these two buttons and then press any button. As soon as the LED goes out, the
transmitter returns to its initial state.
18
' buttons.
2
4
' and '
' buttons (for at least five seconds) until the LED Indicator
1
2
','
',
Advertisement
Table of Contents
