Double Number Of Channels (4-Channel Operation); A) Switching Between 2-Channel And 4-Channel Operation - Conrad Electronic FS20 S4 Operating Instructions Manual

9. Double number of channels (4-channel operation)

In addition to the standard 2-channel hand-held transmitter setting (for
example, two channels with an on/off button) the 'FS20S4' can also be
operated as a 4-channel transmitter.

Only one button is available to each channel, and there are no
more button combinations.
a) Switching between 2- and 4-channel operation
• Switching to a double number of channels (4-channel hand-held
transmitter):
2
Press the
(the upper right and lower left buttons on the hand-held transmitter).
The control indicator/LED on the hand-held transmitter blinks briefly to
confirm the setting. The hand-held transmitter is now in 4-channel
operation and each button now has its own channel.
• Switching to a normal number of channels (2-channel hand-held
transmitter):
1
Press the
(the upper left and lower right buttons on the hand-held transmitter).
The control indicator/LED on the hand-held transmitter blinks briefly to
confirm the setting. The hand-held transmitter is once again in the
normal 2-channel operating mode.

Please note:
Different operating and programming instructions apply when
a double number of channels has been set!
3
and buttons simultaneously for at least 5 seconds
4
and buttons simultaneously for at least 5 seconds
13