Table of Contents
Advertisement
3 We write a backup item in a projector when you click
4 The following dialog is showed if writing is completed.
Note: Internal writing process need about 5 seconds after setting a backup item.
Don't plug out AC cable of a projector during about 5 seconds after this dialog is showed.
B Writing all backup items collectively
1 Select [Set All Backup Datas] in the menu bar. (As same as
[Set All Backup Datas] dialog is showed.
2 Check in each check box of backup item which want to write.
All check box is checked if push [Select All] button , and all check box is checked off if push [Deselect All]
button
3 Push [Set to XJ device] button after check item which want to write.
Writing process is started when the above operation.
4 The following dialog is showed if Writing process is completed.
Note: Internal writing process need about 5 seconds after setting a backup item.
Don't plug out AC cable of a projector during about 5 seconds after this dialog is showed.
button.
— 40 —
button in the tool bar)
Hide quick links:
Advertisement
Table of Contents
