Table of Contents
Advertisement
2 Plug in the special adapter to the Projector.
Note: If the AC power cord of the projector is plugged in without performing the above, a host PC can't find
the USB device driver (Refer to the figure on page 34 for the details).
3 Turn on a power supply of the projector after a host PC and the projector are connected with a USB cable.
Note: Plug in the AC power cord of the projector after a host PC and the projector are connected with a
USB cable.
4 Install the USB device driver according to the [Add New Hardware wizard].
When the following dialog to find the device driver is indicated, check [Search for the best driver for your
device] and specify a location [C:\WINDOWS\INF] .
Check [Search for the best driver for your device] and Select [Next >].
Check [Specify a location] and a location is [C:\WINDOWS\INF].
Check [Next >] after specify a location.
— 32 —
Hide quick links:
Advertisement
Table of Contents
