Table of Contents
Advertisement
3
Remove three screws (S2).
4 First unhook the lower hook toward this side, and then remove the front panel by unhooking the upper hooks.
Note: After removing the front panel, pay utmost attention in handling the lens area.
The surface of the transparent acrylic plate in the AF (auto focus) area next to the lens (on the right
in the figure) is especially delicate. Never touch it directly to avoid sensor malfunction.
Refer to "Precautions when replacing the transparent acrylic plate in the AF area" on page 25 for
details.
— 12 —
Screws (S2)
Hooks
Hide quick links:
Advertisement
Table of Contents
