Printer Programming - GE Security Vigilant VS1 Technical Reference Manual

Chapter 3: Programming

Printer programming

If a printer is connected to your system, it must be programmed
with the printer type and event notification. Event notification
controls where printer trouble events are sent and displayed.
To program a printer:
1. Access the panel configuration options menu. See "Panel
configuration options."
2. Choose Printer.
3. Choose Type.
4. Select the type of printer.
Supervised: The printer connection is supervised (see the
printer's switch settings)
Unsupervised: The printer connection is not supervised
None/CU: There is no printer or you are connecting a computer
running the configuration utility to the panel
5. Choose Event Notification.
6. Set printer trouble event notification. See "Factory default
settings" for printer event notification default settings.
Printer: Yes or No. Specifies if event information is printed
Dialer:
Acct 1 & 2: Event information is sent to both dialer accounts
Acct 1: Event information is sent to dialer account one
Acct 2: Event information is sent to dialer account two
None: Event information is not sent to the dialer
NET: Yes or No. Specifies if event information is sent to the
connected network
CID: Contact ID event code (000 to 999)
7. When finished, choose Save.
8. Choose Save (on the Printer menu).
9. Continue programming your system or press Menu to exit
menu mode.
142
Panel Configuration
Annunciator
CMS Device
Printer
⇩
Printer
Type Supervised>
Event Notification
Save
⇩
Printer
Type Supervised>
Event Notification
Save
⇩
Trouble
Printer
Dialer Account 1&2
NET
⇩
Trouble
NET
CID
Save
⇩
Printer
Type Supervised>
Event Notification
Save
Vigilant VS1 and VS2 Technical Reference Manual
Yes<>
Yes<>
Yes
110