Usb Device Setting - LanParty Blood-Iron P45 Elite Series User Manual

3
BIOS Setup
PWRON After PWR-Fail
Off
When power returns after an AC power failure, the system's power is off. You
must press the Power button to power-on the system.
On
When power returns after an AC power failure, the system will automatically
power-on.
Former-Sts
When power returns after an AC power failure, the system will return to the
state where you left off before power failure occurs. If the system's power
is off when AC power failure occurs, it will remain off when power returns.
If the system's power is on when AC power failure occurs, the system will
power-on when power returns.
CIR Port Address
This field is used to select an I/O address for the CIR device.
CIR Port IRQ
This field is used to select an IRQ for the CIR device.

USB Device Setting

USB 1.0 Controller
USB 2.0 Controller
USB Operation Mode
USB Keyboard Function
USB Mouse Function
USB Storage Function
*** USB Mass Storage Device Boot Setting ***
: Move
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be identical to
this one.
USB 1.0 Controller
This field is used to enable or disable the Universal Host Controller Interface
(USB 1.0).
USB 2.0 Controller
This field is used to enable or disable the Enhanced Host Controller Interface
(USB 2.0).
60
Phoenix - AwardBIOS CMOS Setup Utility
USB Device Setting
Enabled
Enabled
High Speed
Enabled
Enabled
Enalbed
Enter: Select +/-/PU/PD: Value
F6: Fail-Safe Defaults
Item Help
Menu Level
[Enable] or [Disable]
Universal Host
Controller
Interfacefor Universal
Serial Bus USB
Operation Mode
F10: Save ESC: Exit F1: General Help
F7: Optimized Defaults
