Usb Device Setting; Usb Operation Mode - LanParty DK P45-T3RSB Plus User Manual

3
BIOS Setup

USB Device Setting

↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
USB 1.0 Controller
This field is used to enable or disable the Universal Host Controller
Interface (USB 1.0).
USB 2.0 Controller
This field is used to enable or disable the Enhanced Host Controller
Interface (USB 2.0).

USB Operation Mode

High Speed
Full/Low Speed Regardless of the speed of the USB device, it will
66
Phoenix - AwardBIOS CMOS Setup Utility
USB 1.0 Controller
USB 2.0 Controller
USB Operation Mode
USB Keyboard Function
USB Mouse Function
USB Storage Function
*** USB Mass Storage Device Boot Setting ***
: Move Enter: Select
If the USB device is a high speed device, it will
operate in high speed mode. If it is a full/low
speed device, it will operate in full/low speed
mode.
always operate in full/low speed mode.
USB Device Setting
Enabled
Enabled
High Speed
Enabled
Enabled
Enalbed
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Item Help
Menu Level
[Enable] or [Disable]
Universal Host
Controller
Interfacefor Universal
Serial Bus USB
Operation Mode
ESC: Exit F1: General Help
F7: Optimized Defaults