LanParty Blood-Iron P45 Elite Series User Manual page 84

3
BIOS Setup
User Defined Setting Bank #1/2/3/4
Bank Description
To name the BIOS setting, move the cursor to "Bank Description" then press
<Enter>. You can enter up to 60 characters. Providing a name to the BIOS
setting will allow you to easily remember the settings in the bank.
Save to this Bank
To save the BIOS setting, move the cursor to "Save to this Bank" then press
<Enter>. Type <Y> then press <Enter>. This will save the current setting or
the last saved setting to this bank; depending on the option selected in the
"Save Setting to Bank With" field. If you want to immediately reboot to use
the new settings, make sure to save before you exit the BIOS setup utility by
selecting "Y" in the "Save & Exit Setup" submenu.
Load from this Bank
To load the setting saved in the bank, move the cursor to "Load from this
Bank" then press <Enter>. The setting in this bank will replace the current
setting. Make sure to save before you exit the BIOS setup utility by selecting
"Y" in the "Save & Exit Setup" submenu.
Hotkey
You can now load a BIOS setting during system boot up; bypassing the
lengthy process of entering the BIOS utility to load a setting. Move the cursor
to "Hotkey" then press <Enter>. Select the key you would like to use to load
the settings from the bank. When the system boots up, press the key to load
the setting.
84