AMX Vision2 Operation/Reference Manual page 76

Archive Service
8.
In the v2system Properties dialog (FIG. 67), remove Users from the list, and click Apply. You can close
the Computer Management dialog.
FIG. 67 Remove Users from the Member of list
9.
In Windows, select Start > Control Panel > Administrative Tools > Services.
10.
Stop the AMX V2RTSP and AMX Vision2 services.
11.
Right-click AMX V2RTSP and select Properties from the context menu that opens.
12.
In the Properties dialog that appears, select the Log On tab.
13.
Click the This Account option button, and click Browse.
14.
In the Select User dialog, click Advanced.
15.
In the next dialog, click Find Now, and select v2system from the list that appears. Click OK to close this
dialog, and click OK again to close the Select User dialog.
16.
In the AMX V2RTSP Properties dialog (FIG. 68), enter and confirm the password as "Vision2", and click
Apply. Click OK on the alert Log on pop-up.
FIG. 68 Enter and confirm the password
68
2
Vision Operation/Reference Guide