Table of Contents
Advertisement
Quick Links
___________________________________________________________________________________________________________________________________
USER MANUAL
OPTIMA-RACK 1K – 3KVA
ONLINE DOUBLE CONVERSION UPS
User Manual:
•
220V (Europe: «Schuko» Zone)
•
110V (America: «NEMA» Zone)
(120217_EN) OPTIMA-RACK 1K-3K
USER MANUAL
Optima Rack 1-3K
ENGLISH
- 1
___________________________________________________________________________________________________________________________________
1. SAFETY AND USE:
WARNING: This product has been designed to operate safely and reliably for years. Nevertheless, as it is an
electrical device, it is required to read and understand this manual. Keep manuals as references for future consults.
WARNING: This product has been designed to be used indoors, protected of water, direct sun light and extreme
temperatures. This device must not be used outdoors, close to moisture of heat sources.
WARNING: Do not set objects on this UPS. Handle with care. Do not block UPS ventilation.
WARNING: Make sure to connect this unit to proper power line according to selected model. The UPS Technical
Specs sticker shows power rating information. DO NOT connect this UPS to any of its own power outlets.
WARNING: UPS must be installed following instruction from this manual.
The manufacturer is not liable for any damage that might rise from misusing this unit or defective installation.
WARNING: Only computer related equipment can be connected to this UPS. DO NOT connect medical
equipments, life support equipments, microwave ovens, vacuum cleaners, refrigerators, or any other appliance to
this UPS.
WARNING: UPS must be checked, repaired and maintained by qualified personnel only. This product is locked by
screws.
WARNING – ELECTRIC SHOCK RISK:
Inside the UPS there are dangerous high voltages even when disconnected of power line, due to internal batteries
WARNING: In case of emergency turn off the UPS pressing Power Button, unplug it and call technical support.
DO NOT connect laser printers, scanners, or copiers to this UPS.
High power devices may damage this UPS
Disposal
We strongly recommend disposing this UPS according to regulations in your country to prevent
possible environmental damages; besides some parts might be recycled.
BATTERY WARNING: DO NOT dispose batteries in fire as it might explode. DO NOT try to open
batteries, there are dangerous liquids inside.
(120217_EN) OPTIMA-RACK 1K-3K
USER MANUAL
Optima Rack 1-3K
.
- 2
Advertisement
Table of Contents
Related Manuals for Xmart OPTIMA-RACK 1KVA
Summary of Contents for Xmart OPTIMA-RACK 1KVA
-
Page 1: User Manual
USER MANUAL USER MANUAL Optima Rack 1-3K Optima Rack 1-3K ___________________________________________________________________________________________________________________________________ ___________________________________________________________________________________________________________________________________ 1. SAFETY AND USE: WARNING: This product has been designed to operate safely and reliably for years. Nevertheless, as it is an ENGLISH electrical device, it is required to read and understand this manual. Keep manuals as references for future consults. WARNING: This product has been designed to be used indoors, protected of water, direct sun light and extreme temperatures. - Page 2 ___________________________________________________________________________________________________________________________________ 2.A- PRODUCT DESCRIPTION – REAR PANEL: 220V (EUROPE SCHUKO Outlets) Safety Standards Programmable Outlets Standard Outlets OPTIMA & OPTIMA-RACK 1KVA - 1.5KVA AC Input Input Breaker Low Voltage Directive: Protected LAN network jacks EN62040-1-1:2003 An Uninterruptible Power Systems (UPS) Part 1-1: General and Safety Requirement for UPS “EPO”: “Emergency Power Off”.
-
Page 3: Front Panel: Push Button Functions
Intelligent Slot for “SNMP” LAN cards 10. Connector for External batteries (EX models) 11. Output Breakers. OPTIMA-RACK 1KVA / 1.5KVA “ON / MUTE” POWER ON: Keep selected during 2 seconds or longer. BEEP MUTE: In battery mode: Keep selected during 5 seconds or longer to Mute acoustic alarm beep. - Page 4 Rack UPS must be installed using L-Shape type guides for supporting UPS weight. Usually this kind of supports is 3.1.- INTERNAL BATTERIES CONNECTION BEFORE INSTALLING provided with rack cabinets. If not, XMART can provide telescopic guides as optional accessory. Before installing this product internal batteries must be connected. This product is delivered with internal batteries Small black handles included with the UPS are only for locking purposes.
-
Page 5: Configurable Parameters
___________________________________________________________________________________________________________________________________ 3.3.- INSTRUCTIONS TO CONNECT EXTERNAL BATTERIES First Time: Place EX-BATT case close to UPS. Only XMART approved EX-BATT can be connected to UPS EX CHARGE BATTERIES FOR 6 HOURS BEFORE CONNECTING YOUR EQUIPMENTS TO UPS series. Check DC breakers are in OFF position (circuit OPEN) Connect UPS to first EX-BATT using XMART approved DC cable. -
Page 6: Operation
USER MANUAL USER MANUAL Optima Rack 1-3K Optima Rack 1-3K ___________________________________________________________________________________________________________________________________ ___________________________________________________________________________________________________________________________________ 5. OPERATION 6. FRONT LCD PANEL This is UPS is ONLINE DOUBLE CONVERSION type and it has been designed to offer the most clear power without switching transitions or dead times. In that way your hardware but also your valuable data will be safe when your PC related equipment is connected to OPTIMA series UPS. -
Page 7: Beep Alarm
USER MANUAL USER MANUAL Optima Rack 1-3K Optima Rack 1-3K ___________________________________________________________________________________________________________________________________ ___________________________________________________________________________________________________________________________________ Power consumption BEEP ALARM (connected to UPS outlets)I Battery Mode: 1 “Beep” every 4 seconds Indicates power output supplied by UPS: Battery Low: 1 “Beep” per second 0-25%, Output Overload: 2 “Beeps”... -
Page 8: Ups Configuration
USER MANUAL USER MANUAL Optima Rack 1-3K Optima Rack 1-3K ___________________________________________________________________________________________________________________________________ ___________________________________________________________________________________________________________________________________ 8. UPS CONFIGURATION 01: Output Voltage Configuration Output voltage value can be selected from 4 available values 02: CF: Enable or Disable CF ENA: CF function enable CF DIS: CF function disable 03: CF: Frequency value in Hz Output frequency can be configured for battery mode: BAT 50: 50Hz... -
Page 9: Battery Mode
USER MANUAL USER MANUAL Optima Rack 1-3K Optima Rack 1-3K ___________________________________________________________________________________________________________________________________ ___________________________________________________________________________________________________________________________________ If UPS is overloaded by big consuming 08: Programmable Outlets: Enable or Disable load connected at UPS output, UPS ENA: to enable programmable function. changes to BYPASS mode feeding DIS: to disable programmable function. -
Page 10: Troubleshooting Table
USER MANUAL USER MANUAL Optima Rack 1-3K Optima Rack 1-3K ___________________________________________________________________________________________________________________________________ ___________________________________________________________________________________________________________________________________ 11. ALARMS ON LCD ALARM Description ICON on LCD Beep Alarm UPS cannot be powered on even AC ON push button is not been Push ON button during 2 Low battery 1 / s input is OK. -
Page 11: Control Software
- In no event will XMART be liable for any damages caused by the product or the failure of the product to perform, including any lost profits or savings or special, incidental, or consequential damages. XMART is not liable for any claim made by a third party or made by you for a third party. - Page 12 USER MANUAL USER MANUAL Optima Rack 1-3K Optima Rack 1-3K ___________________________________________________________________________________________________________________________________ ___________________________________________________________________________________________________________________________________ 15. BATTERIES MAINTENANCE NAD REPLACEMENT Step 5: Reconnect battery kit to UPS Step 6: Close front cover 15.1.- Battery Care When battery backup time is noticeable shorter it is time to replace batteries. To get longer lifetime we recommend applying a deep discharge every 3 months.
- Page 13 USER MANUAL USER MANUAL Optima Rack 1-3K Optima Rack 1-3K ___________________________________________________________________________________________________________________________________ ___________________________________________________________________________________________________________________________________ 16. SPECIFICATIONS TABLE (For Models 120Vac and 220Vac) 4 Batteries Kit OPTIMA-RACK UPS 1KVA 1.5KVA 2KVA 3KVA 1.- Remove batteries from plastic assembly 2.- Connect new batteries in series as indicated Capacity / Capacidad 1100VA / 800W 1700VA / 1200W...