Job Memory - Toshiba e-studio 160 Operator's Manual For Copying Functions

11. JOB MEMORY

You can store and recall a combination of frequently used copy modes at any time.
In addition to reproduction ratios, image density, copy quantities, editing modes, duplex copying modes
and image shift modes can be stored. Storage is available for up to four combinations.
Storing a New Combination of Copy Modes
1 Select desired copy modes.
Examples:
Reproduction ratio ........ 85%
Copy quantity ............... 30
Image density ............... Automatic
Copy size ..................... Letter-R
• Check that each mode is correctly set.
2 Press the key on the control panel while in the
initial screen for copying. The "EDIT MENU" screen
appears.
3 Press the key to display "JOB MEMORY." Then
press the key.
4 Select "MEMORY" by pressing the
Then press the
5 Select the job number to be saved from "MEMORY1"
to "MEMORY4." Then press the
Tip
When a memory location (with a copy job programmed) is
selected, the Job Memory icon is highlighted.
The stored copy mode is not erased when the digital multi
function system is turned off. When a job number with a copy
mode already stored is selected, the stored copy mode is
deleted and replaced by a new copy mode.
6 Press the key to return to the initial screen for
copying.
key.
key.
key.
READY
EDITING :OFF
JOB BUILD :OFF

JOB MEMORY

JOB MEMORY
RECALL
MEMORY
MEMORY
MEMORY1
MEMORY2
MEMORY3
MEMORY4
1
2
3
4
5
1
6
7
1
8
1
9
10
11
12
4-27