Offset Copying - Toshiba e-studio 160 Operator's Manual For Copying Functions

4. OFFSET COPYING

When the Offset Tray or Finisher is attached, the sets of copies that are collated or stacked in groups are
1
output in one pile but each set is offset, as illustrated.
Example: Making 6 sets of copies from 3-page originals. (Bypass copying is not possible in the offset
mode.)
2
3
4
1 Place the originals in the feeder or on the glass.
Select the desired number of copies, image density
and reproduction ratio.
5
2
Press the
3 Select the OFFSET mode.
6
• Select "NONSORT/OFFSET" or "SORT/OFFSET" from the
FINISHING menu by pressing the
the
7
• When the offset tray is full, the following message appears:
Remove paper from offset.
8
Remove the copies from the tray and press the
continue.
9
• Refer to the procedures described in "NON-SORT
COPYING" when "NONSORT/OFFSET" is selected.
Page 6-3
• Refer to the procedures described in "SORT COPYING"
10
when "SORT/OFFSET" is selected.
11
12
6-6
FINISHING MODE SELECTION
1
2
3
key. The "FINISHING" screen appears.
key.
1
1
1
READY
FINISHING: SORT/OFFSET
key. Then press
key to
Page 6-4
1
NONSORT
NONSORT/OFFSET