6. STAPLING (Cont.)
When the optional Stapler kit is installed
When sets of copies are inserted aligned to the guide, they will be stapled automatically. The stapling
1
direction varies depending on the orientation of the sets. This function is only available when the optional
Stapler kit (KK-1600) is installed.
2
• To staple sets of copies diagonally, align them to the guide
in the front.
3
4
• To position the staple in parallel with the copy's top edge,
5
align them to the guide in the diagonal direction.
6
7
8
9
10
11
12
6-12
FINISHING MODE SELECTION