Audio Settings - Kenwood KDC-HD262U Instruction Manual

AUX
Preparation:
Select [ON] for [BUILT-IN AUX]. ( 4)
Start listening
1
Connect a portable audio player (commercially
available).
Auxiliary input jack
3.5 mm (1/8") stereo mini plug with "L"
shaped connector (commercially available)
2 Press repeatedly to select AUX.
3
Turn on the portable audio player and start
playback.
Set the AUX name
While listening to a portable audio player connected to
the unit...
1 Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [SYSTEM], then
press the knob.
3 Turn the volume knob to select [AUX NAME SET], then
press the knob.
4
Turn the volume knob to make a selection, then
press the knob.
AUX (default)/ DVD/ PORTABLE/ GAME/ VIDEO/ TV
5
Press and hold
To return to the previous setting item, press
10
JS_KWD_KDC_HD262U_KN_EN_1.indd 10
Portable audio
player
to exit.
.

AUDIO SETTINGS

While listening to any source...
1 Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [AUDIO CONTROL], then press the knob.
3
Turn the volume knob to make a selection (see the following table), then press the
knob.
4 3
Repeat step until the desired item is selected or activated.
5
Press and hold to exit.
(or using RC-406)
Press AUD to enter [AUDIO CONTROL].
1
Press J / K to make a selection, then press
2
To return to the previous setting item, press
SUB-W LEVEL –15 to +15 (0)
BASS LEVEL –8 to +8 (+6)
MID LEVEL –8 to +8 (+5)
TRE LEVEL –8 to +8 (0)
EQ PRO
BASS ADJUST BASS CTR FRQ
BASS LEVEL
BASS Q FACTOR
BASS EXTEND
MID ADJUST MID CTR FRQ
MID LEVEL
MID Q FACTOR
TRE ADJUST TRE CTR FRQ
TRE LEVEL
.
.
Adjusts the subwoofer output level.
Adjusts the level to memorize for each source. (Before making an
adjustment, select the source you want to adjust.)
60HZ/ 80HZ/ 100HZ/ 200HZ: Selects the center frequency.
–8 to +8 (+6): Adjusts the level.
1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
ON: Turns on the extended bass. ; OFF: Cancels.
0.5KHZ/ 1.0KHZ/ 1.5KHZ/ 2.5KHZ: Selects the center frequency.
–8 to +8 (+5): Adjusts the level.
0.75/ 1.00/ 1.25: Adjusts the quality factor.
10.0KHZ/ 12.5KHZ/ 15.0KHZ/ 17.5KHZ: Selects the center frequency.
–8 to +8 (0): Adjusts the level.
Default: XX
24/9/2014 4:18:08 PM