Hd Radio™ Tuner - Kenwood KDC-HD262U Instruction Manual

HD Radio™ tuner
You can tune in to both conventional and HD Radio broadcasts.
• To find HD Radio stations in your area, visit
<http://www.hdradio.com>.
Search for a station or channel
1
Press to select HD RADIO.
2
Press repeatedly (or press
select FM1/ FM2/ FM3/ AM.
Press S / T (or press S /
3
station or channel.
• To change the searching method for S / T: Press
repeatedly.
AUTO1 : Automatically search for a station or channel.
AUTO2 : Search for a preset station or channel.
MANUAL : Manually search for a station or channel.
• To store a station or channel: Press and hold one of the number
buttons (1 to 6).
• To select a stored station or channel: Press one of the number buttons
(1 to 6) (or press one of the number buttons (1 to 6) on RC-406).
Direct Access Tuning (using RC-406)
Press DIRECT to enter Direct Access Tuning.
1
2
Press the number buttons to enter a frequency or channel.
3
Press to search for a station or channel.
or DIRECT.
• To cancel, press
• If no operation is done for 10 seconds after step
Tuning is automatically canceled.
JS_KWD_KDC_HD262U_KN_EN_2.indd 5
/ on RC-406) to
on RC-406) to search for a
2
, Direct Access
Select an HD Radio multicast channel
Many HD Radio stations offer more than one channel programming.
This service is called multicasting. While receiving HD Radio multicast
channels....
Press S / T to select your desired channel (HD1 to HD8).
"LINKING" appears while linking to a multicast channel.
Other settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to make a selection (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press
TUNER SETTING
IF BAND AUTO: Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to
interference noises from adjacent FM stations, but sound quality will not
be degraded and the stereo effect will remain.
AUTO YES: Automatically starts memorizing 6 stations with good reception. ;
MEMORY NO: Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 4)
RECEIVE MODE Sets the receive mode of the HD Radio receiver.
AUTO: Automatically tunes to analog broadcast when there is no digital
broadcast. ; DIGITAL: Tunes in to digital broadcast only. ; ANALOG: Tunes
in to analog broadcast only.
CLOCK
TIME SYNC ON: Synchronizes the unit's time to the Radio Broadcast Data System
station time. ; OFF: Cancels.
.
Default: XX
5
ENGLISH
7/10/2014 2:11:35 PM