Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TPI 100
Summary of Contents for TPI 100
- Page 1 EZ Digital Multimeter Instruction Manual...
-
Page 3: Maintenance
MAINTENANCE 1. Battery Replacement: The 265 will display a battery symbol when the internal 9 Volt battery needs replacement. The battery is replaced as follows: a. Disconnect and remove all test leads from live circuits and from the 265. b. Loosen the screw from the back of the 265 bat- tery cover. -
Page 4: Safety Considerations
CAT II - 1000V Installation Category (Overvoltage Category) II: Includes voltages encountered on the step • Test the 100 before using it to make sure it is down side of the transformer on the building and at a operating properly. -
Page 5: General Specifications
2 Each 1.5 Volt “AA” Batteries sured. Battery Life 560 hrs. Alkaline 7. Read the voltage on the TPI 100. Size (H x L x W) 45mm x 78mm x 153mm (1.8” x 3.1” x 6.0”) Note: For Auto mode to operate... -
Page 6: Measuring Resistance
265. 3. Plug the red test lead into the V/W input jack. 4. Set the rotary switch to the “ON” position. 5. Connect test leads to circuit to be measured. 7. Read the resistance on the TPI 100. - Page 7 The Value Leader www.tpi-thevalueleader.com 100 Instruction Manual Test Products International, Inc. 9615 SW Allen Blvd Beaverton, OR 97005-4814 USA Ph: 503-520-9197 Fax: 503-520-1225 Test Product International Ltd. 342 Bronte Street South, Unit 9 Milton, Ontario L9T 5B7 Ph: 905-693-8558 Fax: 905-693-0888...
Need help?
Do you have a question about the 100 and is the answer not in the manual?
Questions and answers