1. Manuals
  2. Brands
  3. TPI Manuals
  4. Multimeter
  5. 135
  6. Instruction manual

TPI 135 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
135
Digital Multimeter
Instruction Manual
1.800.561.8187
information@itm.com
www.
.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 135 and is the answer not in the manual?

Questions and answers

Related Manuals for TPI 135

Summary of Contents for TPI 135

  • Page 1 Digital Multimeter Instruction Manual 1.800.561.8187 information@itm.com www. .com...

  • Page 2: Table Of Contents

    B. SAFETY CONSIDERATIONS ... .5 2. Product Description The 135 is a hand held manual ranging DMM. It features C. TECHNICAL DATA extra large numerals on the LCD, and Data Hold for all Features and Benefits .

  • Page 3: Ec Declaration Of Conformity

    1992 Immunity Standard ALWAYS EN61010-1 1993 Safety Standard • Test the 135 before using it to make sure it is EN61010-2-031 1995 Safety Standard operating properly. To ensure conformity with these standards, this instrument • Inspect the test leads before using to make sure must be operated in accordance with the instructions and there are no breaks or shorts.

  • Page 4: Technical Data

    INTERNATIONAL SYMBOLS 2. Product Applications CAUTION: RISK OF ELECTRIC SHOCK Perform the following tests and/or measurements with the TPI 135 and the appropriate function: AC (ALTERNATING CURRENT) HVAC/R DC (DIRECT CURRENT) FUNCTION REFER TO INSTRUCTION MANUAL DCmV • Thermocouples in furnaces or gas GROUND applications.

  • Page 5: Specifications

    3. Specifications d. ACA IEC 1010 Over Voltage: Range Resolution Accuracy Overload Protection CAT II - 1000V 40µA 0.1µA ±0.8% of reading, Fuse* CAT III - 600V Pollution Degree 2 400µA 0.001mA ±3 digits F600V, 2A, 31CM 40mA 0.01mA 400mA 0.1mA a.

  • Page 6: Measurement Techniques

    Plug red test lead into VΩ input jack. Set the rotary switch on the 135 to the desired range Used for measurement of Resistance, Diode Test in the DCV function depending on the voltage to be and Continuity Buzzer.

  • Page 7: C) Measuring Dc Amps

    3. Plug red test lead into VΩ input jack. personal injury may result. 4. Set the rotary switch on the 135 to the desired range WARNING! in the ACV function depending on the voltage to be Do not attempt to make a voltage measurement of more than measured.
  • Page 8 Plug red test lead into mAµA or A input jack the circuit. depending on value of current to be measured. Set the rotary switch on the 135 to the desired range WARNING! in the DCA function depending on the current to be...

  • Page 9: E) Measuring Resistance

    • Connect the red test lead to one power Set the rotary switch on the 135 to the desired range input line of the motor and the black in the OHM function depending on the voltage to be test lead to the other power input line measured.

  • Page 10: Measuring Diodes

    Plug black test lead into the COM input jack. Plug the red test lead into the VΩ input jack. Set the rotary switch on the 135 to the position. Connect the black test lead to the banded end of the Set the rotary switch to the function.

  • Page 11: H) Continuity Buzzer

    Plug the black test lead into the COM input jack. Temperature Adapter A301 Plug the red test lead into the V input jack. Set the rotary switch on the 135 to the position. Boot Hook A103 Connect the test leads to the circuit to be measured.

  • Page 12: Maintenance

    Reassemble instrument in reverse order from above. All functions except ohms read high Fuse Replacement: Both of the 135 “A” and “mAµA • Very weak battery that will input jacks are fuse protected. Use only Fast Blow, not turn on the low battery 600 Volt fuses with correct current ratings.
  • Page 13 135 Specifications (also see pages 8-9.) Function Range Resolution 400mV 0.1mV 0.001V 0.1V 400V 0.1V 1000V 400mV 0.1mV 0.001V 0.01V 400V 0.1V 750V 40µA 0.1µA 400µA 0.001mA 40mA 0.01mA 400mA 0.1mA 0.1mA 0.01A 40µA 0.1µA 400µA 0.001mA 40mA 0.01mA 400mA 0.1mA...

Table of Contents