Autofocus Area - Hasselblad Digital Camera Handbook

Autofocus Area

Selects the focusing area. Use this function when it is difficult to get the proper focus in auto
focus mode.

1 MENU [Camera]
(Multi)
(Center)
(Flexible
Spot)
Notes
• When this function is set to other than [Multi], you cannot use the [Face Detection] function.
• [Multi] is selected when using the following functions:
–[Intelligent Auto]
– [Scene Selection]
– [Anti Motion Blur]
– [Sweep Panorama]
– [Smile Shutter]
• [Multi] is selected during movie recording. But, if you use an E-mount lens and press the shutter
button half way down during recording, the autofocus area you set before you started recording is
used for focusing.
• When the AF illuminator is used, the setting of [Autofocus Area] is invalid and the AF area is
indicated with a dotted line. AF operates with priority on and around the center area.

[Autofocus Area]
The camera determines which of the
25 AF areas is used for focusing.
When you press the shutter button
halfway down in still image shooting
mode, a green frame is displayed
around the area that is in focus.
• When the Face Detection function is
active, AF operates with priority on
faces.
The camera uses the AF area located in
the center area exclusively.
Moves the focusing area to focus on a
small subject or narrow area by press-
ing the top/bottom/right/left of the
control wheel.

desired mode.
AF range finder frame
AF range finder frame
AF range finder frame
GB
78