Shutter Priority; Shutter Speed - Hasselblad Digital Camera Handbook

Shutter Priority

You can express the movement of a moving subject in various way by adjusting the shut-
ter speed, for example, at the instant of the movement with high speed shutter, or as a
trailing image with low speed shutter. You can adjust the shutter speed also during movie
recording.

1 MENU [Shoot Mode]
2 Select the desired value with the control dial L.
3 Adjust the focus and shoot the subject.
The aperture is automatically adjusted to obtain proper exposure.
You can set the exposure compensation with the control dial R, and ISO with the control wheel.
Notes
• You cannot select [Flash Off] and [Autoflash] in [Flash Mode]. When you want to fire the flash,
press the (flash pop-up) button to pop up the flash. When you do not fire the flash, push down
the flash.
• The (SteadyShot warning) indicator is not indicated in manual exposure mode.
• When the shutter speed is 1 second or more, noise reduction (Long Exposure NR) will be done
for the same amount of time that the shutter was open after shooting. You cannot do any further
shooting during the reduction.
• If proper exposure cannot be obtained after the setup, when you press the shutter button halfway
down, the aperture value blinks. Although you can shoot as it is, resetting is recommended.
• The brightness of the image on the LCD monitor may differ from the actual image being shot.
• When using an A-mount lens (sold separately), you can adjust the shutter speed when focusing
manually during movie recording.

Shutter speed


[Shutter Priority].
When a faster shutter speed is used, a moving subject such
as a running person, cars, and sea spray appears as if they are
stopped.
When a slower shutter speed is used, a trailing image of the
movement of the subject is captured to make more natural
and dynamic image.
GB
71