Cleaning Mode; Attach The Lens - Hasselblad Digital Camera Handbook

Cleaning Mode

Allows you to clean the image sensor.

1 MENU [Setup]
The message "After cleaning, turn camera off. Continue?" appears.
2 Select OK.
The anti-dust is activated automatically.
3 Turn the camera off.
4 Detach the lens.
5 Use the blower to clean the image sensor
surface and the surrounding area.

6 Attach the lens.

Notes
• Cleaning can be performed only when the battery level is
more. The use of an AC-PW20 AC Adaptor (sold separately) is recommended.
• Do not use a spray blower because it may scatter water droplets inside the camera body.
• Do not put the tip of a blower into the cavity beyond the mount, so that the tip of the blower does
not touch the image sensor.
• Hold the camera's face downward to prevent the dust from resettling in the camera.
• Do not apply a mechanical shock to the camera during cleaning.
• When cleaning the image sensor with a blower, do not blow too hard.

[Cleaning Mode]

OK.
(3 remaining battery icons) or
GB
162