Signal Inputs And Outputs - Sony SRW-5000 Installation Manual

1-8. Signal Inputs and Outputs

Input connectors
1 TIME CODE IN
2 REF. INPUT 1
REF. INPUT 2 (OPTION)
3 AUDIO INPUT (AES/EBU)
5 HD SDI INPUT A
5 HD SDI INPUT B (OPTION)
(Option HKSR-5003)
Remote connectors
4 REMOTE 2 PARALLEL I/O (50P)
4 REMOTE1-IN (9P)
4 REMOTE1-I/O (9P)
4 RS232C
4 VIDEO CONTROL (9P)
4 ETHERNET
4 USB
* : Refer to Optional "Interface manual" for details.
1-10
Reduced drawing of rear panel
1 2
XLR 3-pin x 1
Time code 0.5 to 18 V p-p, 10 kZ, balanced
BNC x 4 (Loop through output x 2)
External reference video signal
HD : 0.6 V p-p, 75 Z, sync negative (HD analog tri-level sync)
SD : 0.3 V p-p, 75 Z, sync negative (Black burst or composite sync)
BNC x 6 (1 set : CH1/2, CH3/4, CH5/6, CH7/8, CH9/10, and CH11/12)
AES/EBU digital audio
Complies with SMPTE 299M, SMPTE 276 (AES-3id-1995)
BNC x 1 (outputs the input monitor x 1)
Serial digital interface (1.485 Gbit/s), complies with SMPTE 292M, SMPTE 372M
BNC x 1 (outputs the input monitor x 1)
Serial digital interface (1.485 Gbit/s), complies with SMPTE 292M, SMPTE 372M
* D-SUB 50P connector
D-SUB 9P connector (RS-422A interface), Remote control
D-SUB 9P connector (RS-422A interface), Remote control
D-SUB 9P connector (RS-232C interface) for ISR (Interactive Status Reporting)
D-SUB 9P connector for a HD digital video controller (HKDV-900) connection
RJ-45 modular jack
Complied with 10BASE-T/100BASE-TX
USB series B
Complied with USB standard Ver 1.1
3
5
4
SRW-5000