Reference System - Sony SRW-5000 Installation Manual

1-13. Reference System

For each reference signal of this unit, either of an external reference video signal from the REF. INPUT
connector or input video signal from the HD SDI INPUT A connector is automatically selected according
to the setting of setup menu ITEM-005, and the operation mode (PB/EDIT/REC) of this unit. (Refer to the
table 1-13-1 below.)
n
When the setup menu ITEM-005 is set to "enternal", be sure to input the external reference video signal
to the REF. INPUT connector.
The record might not be correctly done.
Alarm Display for Video Input Signal and Reference Signal
Blink of the STOP button
The button blinks when the reference signal is not locked to an input video signal.
(This function can be canceled in the setup menu ITEM-102.)
. When the setup menu ITEM-005 is set to "input":
The STOP button blinks when the signal is not input to the HD SDI INPUT A connector.
. When the setup menu ITEM-005 is set to "external":
The STOP button blinks in the following either cases.
When no reference signal is input to REF. INPUT connector.
When the reference video signal (REF. INPUT) is not synchronized with an input signal from the HD
SDI INPUT A connector.
. When the setup menu ITEM-005 is set to "auto":
The STOP button blinks in the following either cases.
No signal is input to the HD SDI INPUT A connector when the REC/EDIT mode.
No reference signal is input to REF. INPUT connector when the PB mode.
ITEM-005 setting
Operation mode PB/EDIT/REC
Selected reference signal
1-20
Table 1-13-1. Reference System
external
PB
REF. INPUT
auto
EDIT REC PB/EDIT/REC
HD SDI INPUT A
input
SRW-5000