Sony SRW-5000 Installation Manual page 17

Output connectors
1 AUDIO OUTPUT
1 CUE OUT
1 TIME CODE OUT
1 MONITOR OUTPUT
2 HD REF. OUT
2 SD OUT COMPOSITE (MONITOR)
2 SD OUT SYNC
3 AUDIO OUTPUT (AES/EBU)
5 HD SDI OUTPUT A
5 HD SDI OUTPUT B (OPTION)
(Option HKSR-5003)
5 SD SDI OUTPUT
5 FORMAT CONV. OUT (OPTION)
(Option HKSR-5001)
PHONES
(Upper control panel)
Other
Memory stick
(Lower control panel)
SRW-5000
XLR 3-pin x 4 (1 set : CH1, CH2, CH3, and CH4)
Analog audio
+4 dBm (Standard) (600 Z load), low impedance, balanced
XLR 3-pin x 1
Analog audio
+4 dBm (Standard) (600 Z load), low impedance, balanced
XLR 3-pin x 1
Time code 2.2 V p-p, low impedance, balanced
XLR 3-pin x 2 (1 set : L and R)
Analog audio
+4 dBm (Standard) (600 Z load), low impedance, balanced
BNC x 2
0.6 V p-p, 75 Z, sync negative (HD analog tri-level sync)
BNC x 1 (for character superimpose)
Analog composite video
VBS : 1.0 V p-p, 75 Z, sync negative
BNC x 1
SYNC (NTSC/PAL) : 0.286/0.3 V p-p, 75 Z, sync negative
BURST (NTSC/PAL) : 0.286/0.3 V p-p, 75 Z, sync negative
BNC x 6 (1 set : CH1/2, CH3/4, CH5/6, CH7/8, CH9/10, and CH11/12)
AES/EBU digital audio
Complies with SMPTE 299M, SMPTE 276M (AES-3id-1995)
BNC x 3 (including 1 for character superimpose)
Serial digital interface (1.485 Gbit/s), complies with SMPTE 292M, SMPTE 372M
BNC x 3 (including 1 for character superimpose)
Serial digital interface (1.485 Gbit/s), complies with SMPTE 292M, SMPTE 372M
BNC x 3 (including 1 for character superimpose)
Serial digital interface (270 Mbit/s), complies with SMPTE 259M, ITU-R BT.656
BNC x 2 (for character superimpose)
Serial digital interface (1.485 Gbit/s), complies with SMPTE 292M
JM-60 stereo phone jack
Analog audio
up to _12 dBu (8 Z load), unbalanced
Memory stick x 1
Applicable memory stick : 8 MB to 128 MB
n
The memory card (PCMCIA type) can be used by removing the memory stick adaptor
under the lower control panel.
For removing the memory stick adaptor, refer to the maintenance manual volume 1.
1-11