Monster SC60 HSD Instruction Manual page 8

5
Attaching Floor Brush to Extension Tube
A. Attach Brush Adapter to Floor Brush
B. Attach Floor Brush & Adapter to Extension Tube
Attach Extension Tube to Brush Adapter by pressing the locking
button while sliding Tube into Brush Adapter. Be sure button and
hole line up and button locks in place. To disconnect, press the
locking button and pull the two pieces apart.
6 Attaching Cotton Cloth to Floor Brush
A Cotton Cloth can be fit on the Floor Brush to absorb dirt and
protect delicate surfaces. It can also be used on vertical washable
surfaces following the same procedure as for the floor.
*IMPORTANT*
To avoid scratching surfaces when using Floor Brush on wood floors or
painted walls and ceilings, securely attach Cotton Cloth to Floor Brush.
Make sure Brush bristles do not break through. If necessary use 2 cloths.
Attaching Cotton Cloth
1. Place Floor Brush on
Cotton Cloth.
4. Place folded end under
cloth holder (as shown).
8
Using Your Steam Cleaner
180°
2. Fold Cloth as shown
below.
5. Repeat for other end of Brush,
pulling Cloth to
3. Fold other side of Cloth
as shown below.
stretch it taut.