Monster SC60 HSD Instruction Manual page 11

soap scum and leave a gritty resi-
due on the surface. If this happens,
apply steam with the Floor Brush (no
Cloth) again, and re-clean.
Bathroom Areas
To clean the bath or shower area,
use the Nylon Detail Brush for grout,
shower door tracks, hard to get
areas and heavily soiled areas. The
Window Squeegee will be the most
efficient way to clean the rest of the
tiled area and glass shower doors.
Allow plenty of time for the heat to
penetrate the surface. This is espe-
cially helpful in the shower area if
there is tile or grout.
To clean sanitary fixtures, use the
Detail Nozzle with or without the
Nylon Detail Brush. Use a terry cloth
towel or paper towel to wipe up
excess moisture and residue.
Use Nylon Detail Brush to clean the
sink and taps.
Garden Furniture
Use either of the brushes depending
on the surface area.
Work quickly when cleaning resin
outdoor furniture.
Exterior Areas
To clean car interior, use the Floor
Brush with Cotton Cloth attached,
just as in the home. You should not
expose the bristles to leather – use
only the Brush with Cotton Cloth
attached. For detailing wheels, use
the Detail Nozzle and Nylon Detail
Brush. Exterior windows are clea-
ned best by applying steam with
the Detail Nozzle and wiping with a
paper towel.
To clean bicycles: use the Nylon
Detail Brush.
Artificial Plants
Use Detail Nozzle only, to blow off
dust and dirt.
Fabric Steamer
The Monster SC60 is excellent for
removing wrinkles from fabrics.
You can use the Monster SC60 as
a fabric steamer. Simply steam
the surface from a distance. The
dry steam removes wrinkles and
refreshes the fabric without leaving
it wet.
Nicotine and Tar
Nicotine and tar dissolve at high
temperatures and become a light
yellow oil that has the consistency
of sewing machine oil. When the
nicotine/tar film is touched by a
hot Cotton Cloth clipped over
the Floor Brush, it immediately
dissolves into the cloth. You can
remove it from flat surfaces as fast
as you can move the Brush over
the surface.
Removing Wax, Tar, Etc.
Many stains are only stuck on the
surface of materials and can be
easily and quickly removed by
"blowing" excess material away
from the surface at an angle.
This is accomplished by using the
Detail Nozzle.
Hold a Cotton Cloth to the side to
catch loose residue as it is blown
by the Nozzle.
NOTE: Always vacuum any loose
residue off the surface before you
apply steam to it.
Oven
When cleaning an oven, use the
Nylon Detail Brush to clean around
the elements and drip trays. Use
Detail Nozzle and Detail Brush
for cracks, crevices, and hard to
reach areas.
Refrigerator
Use Detail Nozzle to blow away dirt
in the ice machine and on door
seals. The steam will not dry out or
crack the seals.
Can Openers & Other Kitchen
Equipment
These can be easily cleaned with
the Nylon Detail Brush on the
Nozzle to get into all the nooks and
crannies.
Microwaves & Small Appliances
Use Nylon Detail Brush.
WARNING: Always unplug small
appliances before cleaning.
Kitchen Work Surfaces
Use Floor Brush with Cloth at-
tached. For heavily soiled areas,
use Brush without the Cloth, first in
order to loosen the debris, then fol-
low with Cloth attached to finish.
Using Your Steam Cleaner
11