Monster SC60 HSD Instruction Manual page 12

Refilling the Boiler During Use
10
WARNING: Let unit cool 10 minutes before opening Boiler Cap.
Use care when opening the Boiler Cap – it may still be hot and
steam may escape, causing burns. If Boiler is still hot, water may
spurt out during refilling – this can also cause burns.
• Unplug appliance.
• Place towel or cloth over Boiler Cap. Slowly turn Boiler Cap
counterclockwise and release any remaining steam. If hissing,
wait until last of steam escapes and hissing stops before removing
Boiler Cap.
• Be sure unit has cooled 10 minutes before refilling with water.
• Refill Boiler with a maximum of 1.2L (2 pints) of water, using Filler
Funnel. (Only use the Filler Funnel supplied. Its nozzle is made from
a heat resistant material to prevent it from melting when filling a
hot boiler. Other plastic funnels can melt and become welded to
the inside of the boiler spout voiding your warranty.)
• Firmly screw Boiler Cap back on by turning it clockwise.
• Insert plug into 3-prong electrical outlet.
REMINDERS
• We recommend using distilled or demineralized water as the
best way to care for and utilize your Steam Cleaner.
• If tap water is too hard, use distilled or demineralized water to
avoid the risk of staining pale colored fabrics.
• Do not add detergents, perfumes, oils or other chemical
substances.
Turning Steam Cleaner Off
11
• Unplug Steam Cleaner to turn Off.
• Any remaining water can be left in the unit.
NOTE: We recommend loosening and removing the Boiler Cap after
using appliance to ensure it does not stick for next use. Be sure to let
unit cool before removing Cap.
12
Using Your Steam Cleaner