Table of Contents
Advertisement
Chapter 2 Installation of Expansion Chassis
2.1 Installing hard Drives
The expansion chassis supports hot-swapping allowing you to install or replace
a hard drive while the expansion chassis is running.
a.
Press Make sure the Lock Groove is in unlocked position. Press the Carrier
Open button and the Drive Carrier handle will flip open.
b.
Pull out an empty disk tray. Pull the handle outwards to remove the carrier
from the enclosure.
c.
Place the hard drive in the disk tray. Make sure the holes of the disk tray
align with the holes of the hard drive.
Carrier
Open
Button
User Manual
17
Advertisement
Table of Contents
