PowerSpec Pro 3D Printer Startup Manual page 13

support. Exterior means surface support.
D. Object infill: where
filament. Low infill also can reduce the corners lift up issue during ABS printing.
E. Layer Height: this controls the vertical resolution of the print. The recommended thickness is
F. Number of shells: this is the wall thickness; it's usually set at
G. Feedrate is the speed at which the filament is fed into the extruder. This usually set between
60 is recommended; for
H. Travel feedrate is the speed at which the printer head moves over the base, it's usually set between
printing, 80 is recommended; for
I. Print Temperature:
the default filament.
After you finished inputting in the settings, click
For users who did not choose the default installation path in the installation of Python, clicking the
button in Replicator G will result in dialogue box popping up alerting that the executable Python file cannot be found.
In order to solve this, click the
menu.
Full support
100% is a solid print, 0% is a hollow object. The recommended setting is
PLA printing, 100 is recommended.
PLA printing, 120
is the temperature to which the nozzle is heated. This varies between filament types. Set it to 220 for
Generate Gcode
No button to dismiss the dialogue box. Next, we need to configure the corresponding
means all support.
1.
is recommended.
and the progress bar will appear.
10%; this will save time and
0.27mm.
30 and 70. For ABS printing,
30 and 100. For ABS
Generate Gcode
１１