PowerSpec Pro 3D Printer Startup Manual page 12

When the object is imported you may find that it is not on the virtual build platform or even on the screen, using the
function keys indicated by the blue boxes in the illustration above, you can change the camera angle and reposition the
object onto the center of the build platform. Once you've done this, the next step is to generate the Gcode. This is
achieved by clicking on the button
EXPLANATION OF GCODE SETTINGS
A new window will pop up, giving you several options on how the Gcode will be generated:
A
B
C
D
E
F
G
H
I
A. Slicing Profile: select
B. This tells the printer which extruder to use for a dual-extruder head printer, either the
C. If your sample will have any hanging surfaces, it is recommended to have support. Select
(Generate GCode)
Replicator slicing defaults for ABS printing, then select Replicator 2 slicing defaults for PLA printing.
at the bottom of the panel.
left or right head can be selected.
None indicates that there is no
１０