Setup - Samsung UE60F6300 User Manual

SETUP

The initial setup dialog appears when the TV is first activated. Follow the on-screen instructions to finish the
initial setup process, including menu language choice, channel scan, network connection, and more. At
each step, either make a choice or skip the step. Users can manually perform this process at a later time
under the Screen Menu > System > Setup menu.
If you connect any device to HDMI1 before starting the installation, the Channel Source will be
✎
changed to Settop box automatically.
If you do not want to select Set-top box, please select Aerial.
✎
Samsung 'On TV' Recommendations Service
The On TV service recommends TV programmes based on their popularity or your personal preferences.
To enjoy the On TV service, please follow the steps below. (You must have an Internet connection.)
1. Configure your TV: Select TV source to be used for On TV.
Aerial: Freeview, Freesat, DVB-T/C/S
Set-top box: External Cable Box, External Satellite Box
2. Auto tuning channels: This step only occurs if 'Aerial' was selected in step 1.
3. Select a Service Provider: To select your preferred programme provider for On TV, enter your postcode
and select your Freeview, Freesat or external satellite television provider from the displayed list.
4. Set-top Box Control Test: This test is for checking that your TV remote can control your Set-top Box.
This step only occurs if 'Set-top box' was selected in step 1.
[UF6300-XU]BN68-04881M-02ENG.indb 8
English - 8
2013-11-14 11:44:07