Remove the screws from the Wall Mount hole, before installing the Wall Mount. (60 inches
Preparing before installing Wall-Mount
Case A. Installing the SAMSUNG Wall-Mount
To install a wall-mount, use the Holder-Ring 1.
Wall Mount Kit Specifications (VESA)
The wall mount kit is not supplied, but sold separately. Install your wall mount on a solid wall
perpendicular to the floor. When attaching to other building materials, please contact your nearest
dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
− Standard dimensions for wall mount kits are shown in the table below.
− When purchasing our wall mount kit, a detailed installation manual and all parts necessary for
assembly are provided.
− Do not use screws that do not comply with the VESA standard screw specifications.
− Do not use screws that are longer than the standard dimension or do not comply with the VESA
standard screw specifications. Screws that are too long may cause damage to the inside of the TV
− For wall mounts that do not comply with the VESA standard screw specifications, the length of the
screws may differ depending on the wall mount specifications.
− Do not fasten the screws that are too strongly; this may damage the product or cause the product
to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
− Samsung is not liable for product damage or personal injury when a non-VESA or non-specified
wall mount is used or the consumer fails to follow the product installation instructions.
− Do not mount the TV at more than a 15 degree tilt.
60 ~ 75
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal
injury due to electric shock.
VESA Spec.(A * B)
400 X 400
Case B. Installing another company's Wall-Mount
English - 17