Advertisement
Quick Links
Operation Manual
Airbrush Compressor AF18-2
ARTICLE 34203
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificant-
ly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.
© by WilTec Wildanger Technik GmbH
Seite 11
http://www.WilTec.de
http://www.aoyue.eu
Version 3.2016
http://www.teichtip.de
Advertisement
Related Manuals for WilTec 34203
Summary of Contents for WilTec 34203
- Page 1 Due to further developments, illustrations, functioning steps and technical data can differ insignificant- Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 11 http://www.WilTec.de http://www.aoyue.eu Version 3.2016...
- Page 2 The information contained in this document is subject to change without prior notice. No part of this document can be copied or duplicated in another form without the prior written consent of WilTec Wil- danger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in this user manual or the connection diagram.
- Page 3 The user is responsible for complying with the location specific safety and mounting regula- tions (you can ask an electrician) • In case of device failure the repairs can be carried out only by an electrician or by the WilTec- repair service © by WilTec Wildanger Technik GmbH Seite 13 http://www.WilTec.de...
-
Page 4: Safety Guidelines
The AF18-2 Airbrush compressor is among others suitable for the operation in the following areas: Crafts, hobby, modelling, tattoos and body art, make-up and nail design, as a source of air in the med- ical field, food and chemical industries, laboratories etc. © by WilTec Wildanger Technik GmbH Seite 14 http://www.WilTec.de http://www.aoyue.eu... - Page 5 There is a lower pressure on the outlet of the compressor. What remains, is the pressure you actually work with. The operating pressure may vary according to the connected airbrush gun. © by WilTec Wildanger Technik GmbH Seite 15 http://www.WilTec.de http://www.aoyue.eu...
- Page 6 Do not rotate the knob against high resistance. If necessary the height and the position of the of the knob can vary slightly. For emptying the condensed water collector use the water drain plug. Assembly © by WilTec Wildanger Technik GmbH Seite 16 http://www.WilTec.de http://www.aoyue.eu Version 3.2016...
-
Page 7: Parts Description
VALVE PLATE AF18-#39 AF18-#19 VALVE AF18-#41 PRESSURE REGULATOR AF18-#20 SCREW AF18-#46 AF18-#21 FRONT GASKET AF18-#47 HOLDER SUPPORT AF18-#22 COVER AF18-#48 COVER AF18-#23 FILTER AF18-#49 AIRBRUSH HOLDER AF18-#24 O-RING © by WilTec Wildanger Technik GmbH Seite 17 http://www.WilTec.de http://www.aoyue.eu Version 3.2016 http://www.teichtip.de... - Page 8 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.
Need help?
Do you have a question about the 34203 and is the answer not in the manual?
Questions and answers