Switching The Outer Rings On And Off; The Automatic Heat Up Function; Using The Timer; Starting The Stop+Go - AEG HK634020XB User Manual

8
Operating the appliance

Switching the outer rings on and off

You can match the effective heating surface to the size of the cookware.
To switch on the outer ring touch the sensor field
outer rings touch the same sensor field again. The next indicator comes on.
Do the procedure again to switch off the outer ring. The indicator goes out.

The automatic heat up function

The automatic heat up function starts when
you set a heat setting starting from
cooking zone operates with the maximum
power for some time and than automati-
cally switches back to the heat setting you
set.
If you set a higher heat setting during the
automatic heat up (for example from
), the automatic heat up is adjusted.
If there is still residual heat on the cooking
zone (display
does not start.
The time of the automatic warm up changes
for different heat settings:

Using the Timer

Use the timer to set how long the cooking zone operates for one cooking session.
Set the timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• Selection of the cooking zone: touch
necessary cooking zone comes on.
• Starting or changing the timer: touch
99
minutes). When the indicator of the cooking zone flashes slower, the time counts
down.
• Stopping the timer: select the cooking zone with
timer. The remaining time counts backwards to
goes out.
• Checking the remaining time: select the cooking zone with
cooking zone flashes faster. Display shows the remaining time.
When the time elapses, the sound operates and
• Stopping the sound: touch
You can use the timer as a minute minder while cooking zones do not operate. Touch
. Touch + or - to select the time. When the time elapses, the sound operates and
flashes

Starting the STOP+GO

The function sets all cooking zones that operate to a keep warm setting.
• Touch
), the automatic warm up
to start this function. The symbol
. The indicator comes on. For more
. A
11
10
9
8
7
to
6
5
4
3
2
1
0
1 2
again and again until the indicator of a
or of the timer to set the time (
and touch
00
. The indicator of the cooking zone
00
flashes. The cooking zone switches off.
comes on.
3 4 5 6 7
to switch off the
. The indicator of the
8 9
00
-
00