Switching The Outer Rings On And Off; Automatic Heat Up; Starting The Stop+Go; Using The Timer - AEG HK834060XB User Manual

8
Operating instructions
/

Switching the outer rings on and off

You can match the effective heating surface to the size of the cookware.
To switch on the outer ring touch the sensor field
more outer rings touch the same sensor field again. The next indicator comes on.
Do the procedure again to switch off the outer ring. The indicator goes out.

Automatic Heat Up

You can get a necessary heat setting in a shorter
time if you activate the Automatic Heat Up func-
tion. This function sets the highest heat setting for
some time (see the graphic), and then decreases
to the necessary heat setting.
To start the Automatic Heat Up function the cook-
ing zone must be cold (no
of the cooking zone again and again until the
necessary heat setting comes on. After 3 seconds
comes on in the display.
To stop the function touch

Starting the STOP+GO

The function sets all cooking zones that operate to a keep warm setting.
• Touch
• Touch
does not stop the timer function.
fully locks the control panel but not the sensor field

Using the Timer

Use the timer to set how long the cooking zone operates for one cooking session.
Set the timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• Selection of the cooking zone: touch
necessary cooking zone comes on.
• Starting or changing the timer: touch
99
minutes). When the indicator of the cooking zone flashes slower, the time counts
down.
• Stopping the timer: select the cooking zone with
timer. The remaining time counts backwards to
goes out.
• Checking the remaining time: select the cooking zone with
cooking zone flashes faster. Display shows the remaining time.
When the time elapses, the sound operates and
• Stopping the sound: touch
You can use the timer as a minute minder while cooking zones do not operate. Touch
. Touch
00
flashes
in the display). Touch
.
to start this function. The symbol
to stop this function. The heat setting that you set before comes on.
or to select the time. When the time elapses, the sound operates and
/ . The indicator comes on. For
11
10
9
8
7
6
5
4
3
2
1
0
1 2
comes on.
.
again and again until the indicator of a
or of the timer to set the time (
and touch
00
. The indicator of the cooking zone
00
flashes. The cooking zone switches off.
3 4 5 6 7 8
00
to switch off the
. The indicator of the
9
-