Residual heat indicator
WARNING!
Risk of burns from residual heat!
Operating the appliance
On and Off
Touch
for 2 seconds to start the appliance. Touch
Automatic Switch Off
The function stops the hob automatically and
• all cooking zones are off
• you do not set the heat setting after you start the hob.
• you cover a sensor field with an object (a pan, a cloth, etc.) for longer than 10 seconds.
The sound operates some time and the hob stops. Remove the object or clean the control
panel.
• you do not stop a cooking zone or change the heat setting after some time. See the
table.
Automatic Switch Off times
Heat setting
Stops after
The heat setting
Touch
to increase the heat setting. Touch
shows the heat setting. Touch
/
Switching the outer rings on and off
You can match the effective heating surface to the size of the cookware.
To switch on the outer ring touch the sensor field
more outer rings touch the same sensor field again. The next indicator comes on.
Do the procedure again to switch off the outer ring. The indicator goes out.
.
,
-
6 hours
5 hours
and
at the same time to switch off the cooking zone.
Operating the appliance
for 1 second to stop the appliance.
comes on if:
-
4 hours
to decrease the heat setting. The display
/
. The indicator comes on. For
7
-
1.5 hours