Location And Function Of Parts - Sony DXF-20W Operating Instructions Manual

Location and Function of Parts

1
2
3
4
5
6
7
a Eyepiece focusing ring
Turn this ring to adjust viewfinder image
into sharp focus.
b Camera person tally light
This lights or flashes in the same way as the
REC/TALLY indicators (q;).
To use this light, open the sliding lid.
c Stopper
When the viewfinder is attached to the
camcorder and slid sideways, this prevents
the viewfinder from becoming detached
from the camcorder.
d PEAKING control
Turn this clockwise to emphasize outlines
on the screen, to make lens focusing easier.
This has no effect on the signal output from
the camcorder.
e CONTRAST control
Adjusts the screen contrast. This has no
effect on the signal output from the
camcorder.
16 Location and Function of Parts
TALLY REC BATT
SHUTTER GAIN UP
f DISPLAY switch
Set this to ON to display text and markers
such as safety zone on the viewfinder
screen.
Note
Depending on the camcorder connected, it
is first necessary to set the text or markers to
be shown with a camcorder setting.
g TALLY switch
When the tally light is used, set to HIGH
(high intensity) or LOW (low intensity).
This does not affect the REC/TALLY
indicators (q;) or camera person tally light
(2).
h TALLY indicator (green)
The way in which this green LED indicator
lights or flashes depends on the
specification of the connected camcorder.
8
9
0
qa
qs
Eyecup
qd
qf
qg
qh
qj