Table of Contents THE VIEW PRO ENCODER AND DECODER ........1 QUICK-START OVERVIEW ..............1 MOUNTING THE ENCODER AND DECODER ........2 THE ENCODER/DECODER IN NETWORK ........7 CONNECTING THE ENCODER ............7 CONNECTING THE DECODER ............8 CONFIGURING THE ENCODER/DECODER ........9 VIEW PRO ACCESSORY KITS ............10 PART NUMBERS ................12...
The latest version of the StreamNet Dealer Setup software can be found on the ClearOne website at: http://www.clearone.com/resources#enterprise_streaming QUICK-START OVERVIEW These steps must be done in the following order to use the VIEW Pro encoders and decoders in your StreamNet network: Mounting the Encoder/Decoder. The Encoder/Decoder in Network Connecting the Encoder/Decoder Configuring the Encoder/Decoder.
VIEW PRO ENCODER/DECODER MOUNTING THE ENCODER AND DECODER The VIEW Pro Encoder includes rack-mount ears that attach to the encoder to facilitate mounting in a standard rack The VIEW Pro Decoder includes surface-mount ears that attach to the decoder to facilitate mounting on top of a surface, under a surface, or on a wall.
Page 5
QUICK-START GUIDE The power supply for the decoder can also be mounted to a wall using the included mounting clips. An optional VESA Mount Bracket Kit (910-0002-006) is available for applications where an encoder/decoder must be located on a VESA mount.
Page 7
QUICK-START GUIDE Wall Bracket (Mount to stud or other solid surface) Unit with VESA Bracket hangs on Wall Bracket...
Page 8
VIEW PRO ENCODER/DECODER When the VIEW Pro cables cannot be concealed, cables can be surface mounted using the optional 910-0002-003 VIEW Pro Cable Raceway Kit. This raceway, in 12-inch joinable lengths, can be mounted to the wall to secure and cover the cables to the VIEW Pro devices.
They operate together: the encoders providing the IP data for the decoders to deliver to the displays. CONNECTING THE ENCODER The VIEW Pro E120 Encoder connections are from the back of the unit as shown in the following diagram:...
(Currently Not Used) Audio Output Audio Intput Source Power for USB (Currently Not Used) or 3rd-Party Adapter Audio/Video Control Devices CONNECTING THE DECODER The VIEW Pro D110 Decoder connections are from the back of the unit as shown in the following diagram:...
Dealer Setup manual available for viewing or download at www. ClearOne.com. Information specific to the VIEW Pro Encoder is contained in the VIEW Pro - E120 Digital AV Encoder Installation and Users Manual available for viewing or download at www.ClearOne.com.
VIEW PRO ENCODER/DECODER VIEW PRO ACCESSORY KITS The following accessory kits are available to meet the mounting and control needs of your VIEW Pro Encoders and Decoders: Part Number Kit Name Description 910-0002-001 VIEW Pro Rack Rack Mount Kit for VIEW Pro Encoder E120, Decoder...
Page 13
(Optional) • 1X - IR Receiver Assembly with 6 ft. cable 910-0002-005 VIEW Pro IR IR Receiver Cable, IR Emitter Cable Kit for VIEW Pro Receiver & Emitter Encoder E120, Decoder D110 (Optional) • 1X - IR Receiver with 6 ft. cable, 3.5 mm plug •...
Need help?
Do you have a question about the VIEW Pro and is the answer not in the manual?
Questions and answers