Table of Contents
Advertisement
R
T
A
0
4
N
R
T
A
0
4
N
E
d
.
0
.
1
E
d
.
0
.
1
IP Pool Range: Specify the start and end IP address for the DHCP server's IP
assignment. The default start and end IP Address are 192.168.1.100 and 192.168.1.200
separately. Please note that both addresses should be smaller than 192.168.1.254.
Default Gateway: The default gateway address.
Max Lease Time: The time that the DHCP client is allowed to maintain the assigned
dynamic IP. After the dynamic IP address has expired, the user will be automatically
assigned a new one. The default is 1440 minutes.
Domain Name: Specify a user-friendly name to refer to the group of hosts (subnet) that
will be assigned addresses from this pool.
DNS Servers: The IP address of DNS server used in option filed of DHCP message.
Apply Changes: Click this button to save your configuration.
Undo: Click this button to cancel your configuration.
Set VendorClass IP Range: Click this button and then you will enter the screen as shown in
Figure 4-12. This page allows you to configure the IP address range depending on device's
option60.
Figure 4-12
Device name: Give a name for the class of your device, such as PC, Phone, TV, etc.
Start address: Specify the start address.
End address: Specify the end address.
Default gateway: Enter the IP address of the Modem Router.
U
s
e
r
'
s
M
a
n
u
a
l
U
s
e
r
'
s
M
a
n
u
a
l
Page 28 of 78
Advertisement
Table of Contents
