Disassembly And Assembly - Pride Mobility Legend 3-wheel Owner's Manual

I X . D I S A S S E M B LY A N D A S S E M B LY
DISASSEMBLY
You can disassemble the scooter into seven pieces: the seat, the front section, the rear section, the rear shroud, the
basket, and the batteries. See figure 12. Place the scooter in an area where you have sufficient clearance to move
the parts around. You need about four or five feet in all directions. You may need assistance to lift some of the
scooter components. See IV. “Specifications” for individual component weights.
WARNING! Lifting weight beyond your physical capability may result in personal injury.
Ask for assistance when necessary while disassembling or assembling your scooter.
REAR SHROUD
REAR SECTION
No tools are required to disassemble or assemble your scooter. Always disassemble or assemble your scooter on
a level, dry surface with sufficient room for you to work and move around your scooter. Keep in mind that the
disassembled sections of the scooter take up more floor space than the assembled scooter.
1. Place the manual freewheel lever in the drive (down) position.
2. Coil the charger power cord and store it for future use.
3. Push forward on the seat lock lever to unlock the seat; lift the seat up and off the scooter. See figure 13.
4. Gently pull the shroud away from the frame at the bottom and lift it off of the scooter. See figure 14.
5. Disconnect the battery strap.
Figure 13. Removing The Seat
32
FRONT SECTION
Figure 12. The Legend Disassembled
PULL SHROUD AWAY
FROM FRAME HERE
BEFORE LIFTING
SHROUD UP
www.pridemobility.com
SEAT
BASKET
Figure 14. Rear Shroud Removal
Legend/Rev D/July03
BATTERIES