Kodak Scan Station 520 EX Administrator's Manual page 39

3-26
11. The default for SSL is to not use SSL. If your email server requires
Secure Socket Layer (SSL), check Use SSL.
12. Select Use StartTLS if you want to enable a secure SMTP
connection.
NOTE: Make sure your mail server is configured to use
STARTTLS. If it is not, the Scan Station will fail to send an
E-mail.
13. When your SMTP connection is configured, select Test Connection
to test whether your settings are correct.
The Configuration Organizer will test your settings and display a
"Success" or "Failed" message. If the test connection failed, verify
that all of your settings are correct and make any necessary
changes, until a Success message is displayed.
14. After running the test connection, click OK on the message box to
return to the SMTP Settings screen; then click Done to return to the
E-mail screen.
A-61628 December 2011