Kodak Scan Station 520 EX Administrator's Manual page 101

SFTP
5-16
2. Enter the Proxy Address in the form of a fully qualified domain
name (e.g., FTP.acme.com) or as an IP address.
3. Enter the Username and Password required to access the proxy
server.
4. If the proxy server is configured to communicate on a port other
than Port 21, change or enter the value using the up and down
arrows or keyboard.
SFTP supports two proxy types: HTTP and SOCKS.
Proxy Type: HTTP
1. Select the Proxy Type. If you selected HTTP as your Proxy Type,
the following dialog box will be displayed.
2. Enter the Proxy Address in the form of a fully qualified domain
name (e.g., FTP.acme.com) or as an IP address.
3. Enter the Username and Password required to access the proxy
server.
4. If the proxy server is configured to communicate on a port other
than Port 21, change or enter the value using the up and down
arrows or keyboard.
5. Select the appropriate Authentication Type for the Proxy server. If
you do not know if you should use LOGIN or NTLM, consult your
administrator.
6. Click OK.
A-61628 December 2011