Motor And Gearbox Removal - Sunrise Medical Quickie Pulse 6 Service Manual

Motor and Gearbox Removal

1. Remove the batteries. Refer to the Battery
Removal section of this manual.
2. Locate and disengage the connector
leading from the motor to the control module (fi g.
7.8).
3. Elevate the wheelchair by placing wood
blocks under the battery box (fi g. 7.9).
4. Remove the wheel's hubcap by prying it off
using a common screw drive (fi g. 7.10) .
5. Remove the wheel by removing the 4 bolts
using a 6 mm Allen wrench (fi g. 7.11).
SUNRISE MEDICAL
Section 7
Removal Procedures (cont.)
PULSE 6 SERVICE MANUAL
fig. 7.10
2009 PAGE 7.3
fig. 7.8
fig. 7.9
fig. 7.11