Motor and Gearbox Removal
1. Remove the batteries. Refer to the Battery
Removal in this section.
2. Locate and disengage the connector leading
from the motor to the control module (fi gure..
7.4.1).
3. Elevate the wheelchair by placing wood blocks
under the battery box (fi g. 7.4.2).
4. Remove the wheel's hubcap by prying it off
using a common screw drive (fi gure. 7.4.3) .
5. Remove the wheel by removing the 4 bolts
using a 6 mm Allen wrench (fi gure. 7.4.4).
PAGE 7.4
SEPT 2011
Section 7
Removal Procedures (cont.)
PULSE 6 SERVICE MANUAL
fig. 7.4.1
fig. 7.4.2
fig. 7.4.3
fig. 7.4.4
SUNRISE MEDICAL