Using The Built-In Viewer (Model 5600 Only) - Kodak Slide Projector Operating Manual

Operation
Using the Built-In Viewer
(Model 5600 Only)
Removing the
Lens
Opening the
Viewer
Closing the Viewer
18
Important
Before opening the viewer, you must remove the projection lens from the
projector.
Turn the focus knob to the horizontal position. Push the knob toward the top
of the projector as you withdraw the lens.
Grasp the viewer handle and pull it out from the base of the projector. It will
pop into place.
Slide the power switch to lamp to project your slides.
To close the viewer, fold it and push it back into the body of the projector.
KODAK CAROUSEL® Slide Projector