Maintenance - Kodak Slide Projector Operating Manual

Maintenance

Projection Lamps
Lamp Tips
20
To ensure a long life and trouble-free operation for your projector:
• Allow the air to flow freely around the projector.
• Do not recirculate warm air.
• Keep the projector dust free.
Your CAROUSEL Projector requires no lubrication; all bearings are self-
lubricating.
Included: FHS lamp, 70-hour lamp life (medium-brightness)
Sampling of other lamps:
EXY (200 hours/less brightness)
EXR (35 hours/maximum brightness)
Note: An EXW lamp is not recommended for older models of CAROUSEL
Projectors. Contact the Kodak Information Center at 1-800-242-2424 in the
U.S. or 1-800-465-6325 in Canada if you need help identifying your
particular model.
Projector operation on line voltages above 125 volts greatly
•
reduces the lamp life.
Unplug the projector before changing the lamp.
•
KODAK CAROUSEL® Slide Projector