Kodak Slide Projector Operating Manual page 15

Screen Image
Timer
(Models 4400 and
5600 only)
KODAK CAROUSEL® Slide Projector
Use the elevating foot to horizontally center the projected image on the
screen. To release the foot, press the release button, while lifting the front of
the projector to the desired height. Use the elevating wheel to make fine
adjustments.
If the image is not level, make an adjustment by turning the leveling foot at
the rear of the projector.
To time your slides, use the timer switch for slide changes from 3 to
22 seconds.
To interrupt the timer, press either
the forward or reverse button. For
manual operation, slide the timer
switch to Off.
Operation
11